FLAT EDGE GRAVER SIZE 6

Order-No. 5287/6

FLAT EDGE GRAVER SIZE 6

HSS-Graver last a long time and need to be sharpened a lot less. With careful treatment accomplish the HSS-Graver several times as a WS-Graver.

  • size: 6
  • width: 1.2 mm
  • material: High-Speed-Steel (HSS)
  • ready for use
  • you will find suitable handles with order no. 5300
  • manufacturer: DICK

IMPORTANT NOTE !!!
DICK-graver, made of tool steel (WS), have the right hardness and toughness for the best cutting edge. You keep your good cut if they are careful with sintered Al-Oxide wheel (hardness H-M, grain 50 or 80, depending on the desired fineness of grind) by grinding with water.

Caution !!!
Too much pressure leads to decrease of hardness !

Graver HSS
The HSS graver are ready to use hardened and tempered.
The toughness of the gravers can without affecting the hardness only by a subsequent annealing at 320-350 ° C increased.
Delivery is in the hardness 64-66 HRc.


HSS-FLAT EDGE GRAVER S.10HSS-FLAT EDGE GRAVER S.10
width: 2.0 mm
Order-No. 5287/10
22,25 €
incl. VAT

Piece

FLAT EDGE GRAVER SIZE 2FLAT EDGE GRAVER SIZE 2
width: 0.4 mm
Order-No. 5287/2
19,87 €
incl. VAT

Piece

HSS-FLAT EDGE GRAVER GR.24HSS-FLAT EDGE GRAVER GR.24
Order-No. 5287/24
13,69 €
incl. VAT

Piece

FLAT EDGE GRAVER SIZE 4FLAT EDGE GRAVER SIZE 4
width: 0.8 mm
Order-No. 5287/4
20,88 €
incl. VAT

Piece

HSS-FLAT EDGE GRAVER SIZE 8HSS-FLAT EDGE GRAVER SIZE 8
width: 1.6 mm
Order-No. 5287/8
20,88 €
incl. VAT

Piece

FLAT EDGE GRAVER SIZE 6FLAT EDGE GRAVER SIZE 6
width: 1.2 mm
Order-No. 5288H/6
95,08 €
incl. VAT

Piece

FLAT EDGE GRAVERS 1.2 MMFLAT EDGE GRAVERS 1.2 MM
Order-No. 5299F/1,2
21,18 €
incl. VAT

Piece


This article is now in your shopping cart.
This article is now on your wishlist.