HSS-ONGLETTE GRAVER SIZE 0

HSS-Graver last a long time and need to be sharpened a lot less. With careful treatment accomplish the HSS-Graver several times as a WS-Graver.

• size: 0
• width: 1.6 mm
• material: High-Speed-Steel (HSS)
• ready for use
• you will find suitable handles with order no. 5300

• manufacturer: DICK

IMPORTANT NOTE !!!
DICK-graver, made of tool steel (WS), have the right hardness and toughness for the best cutting edge. You keep your good cut if they are careful with sintered Al-Oxide wheel (hardness H-M, grain 50 or 80, depending on the desired fineness of grind) by grinding with water.

Caution !!!
Too much pressure leads to decrease of hardness !

Graver HSS
The HSS graver are ready to use hardened and tempered.
The toughness of the gravers can without affecting the hardness only by a subsequent annealing at 320-350 ° C increased.
Delivery is in the hardness 64-66 HRc.