HSS-ONGLETTE GRAVER SIZE 0

Order-No. 5289/0

HSS-ONGLETTE GRAVER SIZE 0

HSS-Graver last a long time and need to be sharpened a lot less. With careful treatment accomplish the HSS-Graver several times as a WS-Graver.

  • size: 0
  • width: 1.6 mm
  • material: High-Speed-Steel (HSS)
  • ready for use
  • you will find suitable handles with order no. 5300
  • manufacturer: DICK

IMPORTANT NOTE !!!
DICK-graver, made of tool steel (WS), have the right hardness and toughness for the best cutting edge. You keep your good cut if they are careful with sintered Al-Oxide wheel (hardness H-M, grain 50 or 80, depending on the desired fineness of grind) by grinding with water.

Caution !!!
Too much pressure leads to decrease of hardness !

Graver HSS
The HSS graver are ready to use hardened and tempered.
The toughness of the gravers can without affecting the hardness only by a subsequent annealing at 320-350 ° C increased.
Delivery is in the hardness 64-66 HRc.


HSS-ONGLETTE GRAVER SIZE 1HSS-ONGLETTE GRAVER SIZE 1
width: 1.8 mm
Order-No. 5289/1
22,25 €
incl. VAT

Piece

HSS-ONGLETTE GRAVER SIZE 2HSS-ONGLETTE GRAVER SIZE 2
width: 2.0 mm
Order-No. 5289/2
22,25 €
incl. VAT

Piece

HSS-ONGLETTE GRAVER SIZE 3HSS-ONGLETTE GRAVER SIZE 3
width: 2.2 mm
Order-No. 5289/3
22,25 €
incl. VAT

Piece

HSS-ONGLETTE GRAVER SIZE 4HSS-ONGLETTE GRAVER SIZE 4
width: 2.5 mm
Order-No. 5289/4
22,25 €
incl. VAT

Piece

ONGLETTE GRAVERS 1.6 MMONGLETTE GRAVERS 1.6 MM
Order-No. 5299S/1,6
21,24 €
incl. VAT

Piece


This article is now in your shopping cart.
This article is now on your wishlist.