Texturing Hammer, doublesided, circles / pyramids
Our texturing hammers are used with non-ferrous metals (copper, brass, silver and gold) for making attractive patterns to give your creations an eye-catching look. Each hammer has two different patterns. More the hammer is used, the more interesting the patterns become.
To use this texturing hammer, place sheet metal on a flat metal block or anvil and strike sharply. In no time you will have interesting patterns.
- length including handle: ca. 275 mm
- Hammerhead: approx. Ø 30 mm x L 75 mm
- weight including handle: ca. 340 g
- Patterns: circles / pyramids
Safety instructions and useful information on using hammers
Information on occupational safety when using hammers:
- Wear safety goggles and protective gloves when working.
- Only use hammers for their intended purpose.
- Do not use hammers as levers.
- Choose the type and size of hammer according to the work to be carried out.
- Before and during work, check that the hammer head is firmly attached to the hammer handle.
- Only use the working surfaces of the hammer.
- Blows with the side surfaces can damage the unhardened hammer eye and endanger the secure fit of the handle.
- Never hit two hammers against each other and never hit workpieces that are harder than 46 HRC with steel hammers. Use a suitable soft-face hammer for this.
- Avoid impacts.
- Do not use hammers that have a beard on the track or pin.
- In areas where there is a risk of explosion, only hammers with the appropriate approval may be used (avoid flying sparks).
- Do not store wooden handle hammers in an environment that is too warm or too dry, or in an environment that is too humid. As a natural product, wood loses moisture and shrinks or swells, damaging the fibers. Both of these things endanger the secure fit of the handle.
- Always use only suitable replacement handles and wedges.