PUK 6 from Lampert - the jewelry welder
The PUK 6 is THE jewelry welder for every jewelry manufacturer, goldsmith, silversmith, watchmaker, jeweler and many more.
Welding on fittings, applying and repairing metal to edges and surfaces on jewelry and watches, fixing work, welding eyelets, closing pores, producing seams and much more is possible with the PUK 6. The PUK 6 also handles the welding of precious metals including silver, copper, bronze and all other weldable alloys as well as material thicknesses of less than 0.2 mm with ease.
A comparison with its predecessors shows: 20 years of experience and passion in the development of jewelry welders have raised the features of the PUK 6 to an unprecedented level.
PUK 6 Präsentation mit Christoph Straube - deutsche UntertitelVideo is for illustrative purposes only and may also show products from other manufacturers.
POSSIBLE APPLICATIONS
To ensure that you can use the possibilities of the PUK as efficiently as possible, we recommend the tips, workshops and videos on the manufacturer's website: Click here to open Lampert's-Website
Scope of delivery:
- 1 Control Unit PUK 6 (no. 4960/SG6)
- 1 Welding-Microscope with hand rest (no. 4961/SM6)
- 1 Handpiece (no. 4960/100)
- 4 Electrodes 0,80 mm WLA (no. 4960/413)
- 2 Electrodes 1,00 mm WLA (no. 4960/417)
- 1 Eceltro clamp (no. 4960/710)
- 1 Diamondwheel (no. 4960/706)
- 3 m Hose (no. 4960/SCH)
Important: Be sure to order, too!
The PUK6 cannot be operated without a flow regulator. Please order it at the same time!
Informations around the PUK6
HINT:
Informations about the whole PUK-Series directly from the manufacurer: Lampert-Webpage
The facts of the PUK 6 jewelry welders at a glance:Design
- Redesigned display with improved resolution
- Clear design language with timeless aesthetics as a visual highlight at any workplace, both in the workshop of goldsmiths and silversmiths and in the salesroom of jewelers
- Noble, selected materials for highest demands on value and appearance
Welding
- Up to 3.3 spot welds per second: up to 65% faster spot weld sequence
- More homogeneous, smoother spot welds – excellent weld even with variable spot spacing
- Higher heat input if required: Perfect results even with critical materials
- The new PUK 6 jewelry welders can produce 50% finer spot welds in the lower power spectrum.
- Minimum pulse duration now down to 0.1 ms: 67% shorter impulse duration in micro mode
Handpiece and electrode
- 20% faster and thus more agile electrode lifting
- Maximum electrode thickness now up to 1 mm
- Up to 50 % longer service life of the electrode
Average measured service life improvement in test setups, actual value depends on individual user profile
Operation
- 70% higher display resolution with increased viewing angle under all ambient conditions – real added value in the workshop for every goldsmith and silversmith
- Faster operation and material selection (gold, silver, platinum, palladium, copper alloys, titanium and more) through direct control with one-hand joystick with turn-push-tilt function
- Faster maximum spot weld sequence due to extended speed function – selectable in 3 levels
- Refined micro mode with tighter gradation enables extended spectrum when welding at the lower power limit
- New standby mode: Continuous availability with 85% lower energy consumption
Technical data
- Amperage (TIG) min./max. 9 – 630 A
- Pulse duration (TIG) min./max. 0.1 – 34 ms
- Current (fixation welding) min./max. 80 – 700 A
- Pulse duration (fixation welding) 1.5 ms
- Welding speed up to 3 Hz
- max. Loading time 0,8 s
- Number of metal programs 11
- Range display with recommended settings +
- Warning for excessive settings +
- High frequency welding +
- automatic gas pre-flow time +
- Gas consumption approx. 2 l/min
- Inert gas Argon > 99.9 % e.g. argon 4.6
- Power consumption during welding 400 VA
- Power consumption in float mode 7 W
- Weight 9,5 kg
The functional principle of PUK welding- If the electrode tip touches the workpiece, the welding process starts automatically by protecting the welding point from oxidation with protective gas and drawing an electric arc (energy flow) from the contact point. This creates a melting point of approx. 0.2 to 3.0 mm in diameter at the contact point (depending on the material and setting). A stable and clean welding point is created.
- The precise positioning of the welding points is made possible by placing the electrode tip on the workpiece. The arc required for welding is ignited precisely from the point of contact.
- The energy flow during welding is influenced by the angle at which the electrode tip touches the workpiece. Welds can thus be directed in the desired direction. Previously applied metal can be easily distorted or modeled.
- The PUK precision welding devices open up many possible applications. Welding on fittings, applying metal, fixing workpieces before soldering, welding eyelets, closing pores and creating seams are just a few examples.
- Metal can be added without any problems. Material can be applied to fractures, pores or depressions using welding wires.
- All metals or alloys that are suitable for TIG or laser welding are suitable for welding. In addition to precious metal alloys, these include many steels, titanium, nickel and tin alloys (fashion jewelry).
PUK welding microscope - eye protection and precision- New elegant design - perfectly matched to the PUK 6
- Height and tilt adjustment for optimal working comfort and ergonomic working position
- Padded hand rests for comfortable working
- LED lighting on the microscope head, adjustable in 4 brightness levels, optimal illumination of the work area
- High precision at 10x magnification (optional 15x)
- Electronically controlled LCD eye protection module
- Can also be used as a full-fledged viewing microscope
Welding Microscope SMG6:
- Perfectly matched to the PUK 6
- Articulated arm can be rotated and swiveled in all directions for particularly ergonomic work, even on very large, bulky objects
- Individually adjustable headrest
- Table stand for individual mounting on the workbench
- Bright LED lighting on the microscope head, adjustable in 4 brightness levels, optimal illumination of the work area
- High precision with 10x magnification (optional 15x)
- Electronically controlled LCD eye protection module
- Can also be used as a full-fledged viewing microscope
Other useful accessories:- no. 4960/FS Foot-Controller
- no. 4960/845 Tack-Welding-Set
- no. 4960/858 Grinding motor
When grinding the electrode tips the electrodes are held onto the rotating diamond disc at a preadjusted angle of 15° and turned between the fingers. The diamond disc is securely embedded in a stable aluminium housing, so that only the front of the grinding surface is accessible. - no. 4960/411-419 PUK-Electrodes
- no. 4960/345 Welding-Wire-Set
includes:
- no. 4960/310 Titan
- no. 4960/320 Stainless steel
- no. 4960/330 Palladium/Silver
- no. 4960/340 Yellowgold 750
- no. 4960/341 Yellowgold 585
- no. 4960/342 Whitegold 750
- no. 4960/343 Platinum 960
- no. 4960/344 Silver